ISO 15118 Suite

Plug&Charge Remote

Plug in, and charging starts. Plug&Charge Remote brings that experience to public charge points without ISO 15118, so more of the charge points already installed can offer Plug&Charge while the market moves to ISO 15118. Hubject recognizes which vehicle is plugged into which charge point, from the time and location each one reports, and authorizes the session with the driver's existing Plug&Charge contract.

Contact us

Benefits

Offer Plug&Charge across your network
Charge point operators (CPOs) can offer Plug&Charge at public charge points without ISO 15118 as well as those with it, using the hardware already in place.
Plug&Charge at more charge points for your drivers
Vehicle manufacturers (OEMs) can give their drivers the Plug&Charge experience at more public charge points, encouraging wider use of Plug&Charge.
A small integration, no hardware changes
CPOs send plug-in data their backend already receives over OCPP and get confirmed pairings back from Hubject. The charge points themselves stay as they are.

How it works

Plug&Charge Remote recognizes which vehicle is plugged into which charge point, without the charge point needing ISO 15118.

step 01

Select a Plug&Charge contract

The driver has a Plug&Charge contract from their EMP selected in the vehicle.

step 02

The driver plugs in

The vehicle tells its manufacturer's backend that it has been plugged in, and the charge point tells the CPO's backend the same.

step 03

Hubject identifies the vehicle

Both backends send Hubject the time and location of the plug-in. Hubject pairs the vehicle with the charge point and checks the driver's Plug&Charge contract.

step 04

The CPO authorizes the session

Hubject confirms the pairing to the CPO's backend. The decision to authorize stays with the CPO.

step 05

Charging starts

The session is authorized with the driver's EMP, and charging starts automatically.

Features

Plug&Charge Remote reuses the existing Plug&Charge ecosystem rather than replacing it.

Infrastructure

Pairing technology that identifies which vehicle is plugged into which charge point

Works with public charge points that do not support ISO 15118

Runs alongside contract-based Plug&Charge

Security

Secure connections between stakeholders, end-to-end

A system designed for broad participation, reducing dependence on any single vendor

Authorization stays with the CPO

Getting started

CPOs: send plug-in data from your backend and receive confirmed pairings by webhook

Vehicle manufacturers: send plug-in data from your backend via telematics

Uses the Plug&Charge contracts already in the vehicle, so no new contracts are needed

Coming to public charge points at the end of 2026

Plug&Charge Remote is currently in pilot, with launch planned for the end of 2026. Partners include the charge point operators Eulektro and autoSense, and the Volkswagen Group.

Plug&Charge Remote pilot availability

Resources

Bring Plug&Charge Remote to your charge points

Plug&Charge Remote is in pilot now. Talk to the team about taking part.