ISO 15118 Suite

Certified TLS 1.3 readiness for
ISO 15118-20

Every ISO 15118-20 use case, from Plug&Charge to private, smart and bidirectional charging, depends on a secure TLS 1.3 connection between the EV and the charger. Hubject’s EVSE Check for ISO 15118-20 mutual Transport Layer Security (mTLS) tests how reliably your charging hardware sets up that connection, and whether it still connects with EVs that use TLS 1.2. You get a clear report with concrete findings, and expert support to fix them.

Contact us

Benefits

Ready for the January 2027 requirements
From January 2027, the AFIR Delegated Acts require new and renovated public charge points to also support ISO 15118-20, which is built on TLS 1.3. A documented result shows where your product stands.
Connections across protocol versions
TLS 1.3 to TLS 1.2 interoperability tests make sure your charger connects with EVs that support different protocol versions, so drivers are not left falling back to a card or app.
One foundation for every ISO 15118-20 use case
Plug&Charge, private charging, smart charging and bidirectional charging all rely on the same TLS 1.3 connection. Getting it right once supports every use case you plan to offer.
Certification your customers can see
Use the EVSE Check logo in your own marketing and appear as a validated partner on the Plug&Charge Ecosystem Overview.

How it works

TLS issues are found and fixed in the lab, before your chargers are installed.

step 01

Apply

Request the EVSE Check service.

step 02

Test your implementation

Start implementation testing with Hubject’s test automation.

step 03

Get expert support

Work through findings with technical support from Hubject experts.

step 04

Attend the audit

Bring your charger to the Hubject Testing Facility in Hennigsdorf for the in-person audit.

step 05

Get certified

Once passed, receive the EVSE Check certificate and logo, and a listing as a validated partner on the Plug&Charge Ecosystem Overview.

step 06

Retest after updates

Use post-certification retesting when you release new firmware or hardware.

Features

What’s tested

TLS 1.3 connection: The setup of the secure TLS 1.3 connection between the EV and the charger.

Certificates and authorization: The exchange and validation of certificates, and the full authorization flow through to the start of charging.

TLS 1.3 to TLS 1.2 interoperability: Tests that your charger finds a working connection with EVs that use either protocol version.

Testing and support

Requirements and test cases: Access to the requirements and test cases, with onboarding to the service.

Test environment: Access to the Hubject test environment and test automation for the EVSE Check.

Hubject PKI experience: Hubject operates the Hubject PKI, one of the central trust anchors for Plug&Charge, and knows where implementations typically go wrong.

Certification

In-person audit: Carried out at the Hubject Testing Facility in Hennigsdorf. The EVSE Check is available in the EU.

EVSE Check certificate: A certificate and logo you can use in your own marketing, and a listing on the Plug&Charge Ecosystem Overview.

Post-certification retesting: Retesting for new firmware and hardware, available as an additional service.

Go deeper

Get your chargers certified for ISO 15118-20 TLS 1.3

Find out where your TLS 1.3 implementation stands, fix what needs fixing, and certify your chargers at the Hubject Testing Facility.