ISO 15118 Suite

Certificate Provisioning for Charging Hardware Manufacturers

Every charger needs its own certificate for ISO 15118-2, ISO 15118-20 and Plug&Charge, and that certificate must be requested, installed and kept up to date. With the Hubject EVSE TLS and Plug&Charge Service, charging hardware manufacturers take on this task for their customers. The manufacturer's backend connects directly to the Hubject vehicle-to-grid (V2G) public key infrastructure (PKI), obtains certificates for each charger for both ISO versions and keeps them current, while charge point operators (CPOs) only need to authorize the charger.

Contact us

Benefits

Added value for your customers
Offer the CPOs who buy your hardware chargers that support ISO 15118-2, ISO 15118-20 and Plug&Charge, with certificate handling included as a service.
Faster Plug&Charge rollout
Plug&Charge for ISO 15118-2 and ISO 15118-20 can go live without CPOs first upgrading their backend, and both versions run in parallel rather than through a lengthy migration project.
Support for AFIR readiness
From 1 January 2027, the Alternative Fuels Infrastructure Regulation (AFIR) Delegated Acts require new and renovated publicly accessible charge points in the EU to support both ISO 15118-2 and ISO 15118-20. The service supports AFIR readiness by giving your customers straightforward access to the certificates required for both versions.

How it works

From manufacturer onboarding to automatic authentication at the charger in five steps.

step 01

Onboard to the Hubject V2G PKI

The charging hardware manufacturer is onboarded to the Hubject V2G PKI, and its chargers are preconfigured with the trusted certificate chain: the Hubject V2G Root and the intermediate certificates.

step 02

Connect the backend

The manufacturer's charger backend connects directly to Hubject, registers each charger and retrieves the certificates it requires.

step 03

The CPO authorizes the charger

The CPO authorizes the charger through its standard OCPP connection.

step 04

Hubject issues the certificates

Hubject issues a certificate per charger for ISO 15118-2 and ISO 15118-20 in parallel. The manufacturer delivers the certificates to the charger over its own connection, without requiring the CPO's OCPP connection, and manages renewals throughout the certificate lifecycle.

step 05

Charging starts automatically

The vehicle and charger authenticate each other automatically when the driver plugs in. The CPO handles authorization with eMobility providers (EMPs) through eRoaming as usual.

Features

The service moves certificate handling from the CPO to the charging hardware manufacturer, using the Hubject V2G PKI that already connects vehicle manufacturers, EMPs and CPOs for Plug&Charge.

A certificate for every charger

Each charger receives one Supply Equipment Communication Controller (SECC) certificate per ISO version, for ISO 15118-2 and ISO 15118-20.

Each charger is registered with the Hubject Registration Authority.

Certificate lifecycle handling covers issuance, updates and renewals.

Access to the Hubject V2G PKI

Onboarding connects the manufacturer and its chargers to the trusted Hubject certificate chain: the Hubject V2G Root, two CPO Sub-CAs and the charger certificate.

The Root Certificate Pool provides chargers with the trusted root certificates required for Plug&Charge.

The Contract Certificate Pool provides the drivers' contract data required for Plug&Charge.

Independent of the CPO backend

Certificates are handled in the Hubject V2G PKI rather than in the CPO backend, so the service is compatible with OCPP 1.6, OCPP 2.0.1 and OCPP 2.1.

No custom workarounds or proprietary implementations are required on OCPP versions earlier than 2.1.

The manufacturer integrates once, instead of each CPO building five interfaces to Hubject.

For charge point operators

CPOs can offer Plug&Charge on their chargers without operating their own PKI service, running a certificate project or first upgrading their backend. The CPO authorizes the charger through OCPP and continues its normal operations.

Requirements for issuing certificates

To issue certificates, the charging hardware manufacturer needs either an EVSE Check or a self-certification for each charger type, plus a side letter from each CPO.

EVSE Check

The charger type is certified by Hubject for ISO 15118-2, ISO 15118-20 or both, covering security and function. This route also demonstrates interoperability.

Self-certification

The manufacturer documents its security concept. This route covers security only and does not demonstrate interoperability.

CPO side letter

In addition, each CPO provides a side letter authorizing the manufacturer to issue certificates in its name.

Pricing

Pricing consists of a one-time setup fee and an annual fee per SECC ID for each ISO version. The annual fee decreases as volume increases.

One-time fees

Setup fee
€3,800
including one CPO Operator ID
Onboarding fee
€1,500
for each additional CPO Operator ID
Get started

Annual fee per SECC ID, per ISO version

Up to 5,000 SECC IDs: €0.99
5,001 to 25,000 SECC IDs: €0.75
25,001 to 75,000 SECC IDs: €0.60
75,001 to 200,000 SECC IDs: €0.45
More than 200,000 SECC IDs: €0.35

Available in Europe, the Americas and Asia-Pacific

The service is available to charging hardware manufacturers that operate a backend for their chargers. It is delivered through a direct connection between the manufacturer's backend and the Hubject certificate API.

Resources

Deliver Plug&Charge as a service

Contact Hubject Business Development to begin onboarding.